How to open an ampoule without a nail file with a dot. How to open an ampoule with medicine. How to open an ampoule? Councils and recommendations. Contraindications to the use of caffeine

Sometimes it is necessary to inject at home. This may be an injection of vitamins, anti-anxiety drugs, or as prescribed by a doctor. It is not always possible to go to the clinic, where they know exactly how to open the ampoule and inject the drug. But how to protect yourself from mistakes and not harm by giving an injection at home?

How to open the ampoule correctly?

First of all, it is necessary to open the ampoule correctly. There are two types of ampoules according to the opening method:

traditional, which require a notch on the neck;
with a dot at the point where the glass cone was broken.

First you need to determine the type of ampoule. This is usually not written on the packaging. But a cursory glance at a glass flask is enough to understand whether it belongs to the traditional ones or not.

The dot can be black, red, or another color. If it is not on the neck, then to open it you need a special nail file, which is hidden under the top cover of the package. Such a nail file has the shape of a circle with a cut segment, the edges of which are coated with an abrasive material.

The ampoule opening sequence includes the following steps:

1) sawing is done with abrasive edges on one side of the neck;

2) without undue effort, it is carried out 3-4 times with a nail file along the selected side of the ampoule;

3) then it is necessary to moisten a cotton pad or ball in an antiseptic;

4) with one hand, the base of the cone with the medicine is held, and the thumb and forefinger of the second hand grasp the protrusion of the ampoule;

5) in order not to injure fingers, cotton wool is used;

6) a break is made by a sharp movement of the hand in the direction opposite to the one where there is a file.

Takova correct sequence opening a medical ampoule. However, the nail file can be lost. Then a nail file from a cosmetic set or a piece of sandpaper will serve as a replacement for it. Be sure to wipe the place of the file with alcohol or another antiseptic to prevent the ingress of microorganisms into the preparation.

We open the ampoule with a dot

Some manufacturers make more progressive solutions - with a marker. In this case, the opening process is simplified and includes the following steps:

the cone marker is directed towards itself;
the ampoule opens with a slight movement of the hand away from you.

In this case, it is not necessary to use cotton wool, since the risk of injury is minimal.

Then the drug is drawn into the syringe, air is released and an injection is made into the muscle. The injection site is disinfected beforehand. The solution is injected smoothly, after which the needle is removed, and a cotton ball is applied in its place.

Quite often, a person finds himself in a situation where he needs to get an injection. When contacting a specialized medical institution with this manipulation, there are never any difficulties. Experienced medical worker knows how to open an ampoule, mix the solution with medicinal powder and prepare a syringe. However, many people are accustomed to self-treatment and prefer to inject at home, with the help of relatives.

If you are one of the patients who do not want to visit medical institutions to receive the next dose of the drug, then you probably had a question about how to open the drug ampoule yourself. Also, some cosmetic preparations are available in glass vials, for example, hair ampoules, vitamin preparations for the skin. Many women already easily carry out a series of manipulations and quickly get to the contents of a glass container. There are several ways to properly open the ampoule. Following the instructions, you can easily perform this maneuver. Let's consider several methods in detail.

The first way: using a file

Usually glass cones with medicinal or cosmetic preparations are sold in a package with a special file. Using it, you can easily get to the contents of the ampoule.

Hold the medicine in one hand. With the fingers of the second hand, firmly hold the file and make several reciprocating movements with the tool along the narrowest point of the glass container.

After that, you need to take a paper napkin or an unnecessary cloth and wrap it around the top of the glass. With a sharp but gentle movement away from you, break the glass and open the package.

The second way: the use of improvised means

Sometimes there are situations when the file for opening medicines lost or missing from the beginning. What to do in this situation? How to open an injection ampoule without a file? In this case, you can use improvised means, for example, a knife, a nail file.

Similarly to the first method, take an ampoule and use the selected tool to make several notches on its neck in a narrow place. After that, open the preparation, after wrapping the glass with a napkin.

It should be noted that a nail file is a more effective tool for opening glass ampoules than a knife. However, it should be borne in mind that the material must be glass or metal. Paper nail files will be powerless in this situation.

How to open ampoules with a dot?

IN Lately Increasingly, drug injection manufacturers are producing packaging that does not require pre-cutting. Information about this is usually not indicated on the packaging. How to find out that the ampoule can be opened without a file?

This type of glass container has a dot at the widest point of the neck. It can be red, green or black. Also, this type of injection has a rim of the corresponding color in the narrow part of the neck. It is for him that it is necessary to break the packaging.

Take the ampoule with a point in your hand. Cover the top of the glass with your other hand (don't forget the napkin). Make a sharp movement away from you and open the medicine.

How to open a dry powder ampoule?

In most cases, injection medicines are available in ready-made liquid form, but some drugs require pre-preparation. In this case, you will have two ampoules that need to be opened. One of them has a liquid content. How to open such a package, tell the methods described above.

The second glass container usually has a dry bulk content. The instruction suggests mixing these two bases. In order to get to the loose powder, you need to do the following.

Open the liquid vial and draw the medicine into the syringe. Open the second ampoule with any sharp object: a knife, scissors or a nail file. Pick up the corner of the metal cover with a tool and gently bend it. Insert the syringe needle into the ampoule by piercing the rubber cap. After this, it is necessary to mix the medicine thoroughly and draw it back into the syringe.

Conclusion

Use the option that suits you how to open the ampoule. For right choice try each of the described methods. Remember to be careful when working with glass.

If you often have to open ampoules, purchase a special silicone tool. It will help you open glass cones without injury and additional funds.

Before proceeding with the procedure, wipe the glass with cotton wool soaked in an alcohol solution. This is necessary in order to prevent microbes from entering the drug.

Instruction

Take what you need ampoule With medicine. Be sure to check the expiration date, as expired drugs are extremely dangerous to health. Lightly tap the ampoule several times with your finger. This is necessary so that the medicine moves from the tip of the flask to the bottom.

Take out a special nail file, which is usually included in the kit, and file the tip of the ampoule from all sides. If you bought medicine without a box, try using a regular nail file. In the most extreme case, you can use an ordinary kitchen knife.

Wrap ampoule with a cloth napkin, this is necessary so that during further actions you do not accidentally cut yourself. Break off the tip of the ampoule by pressing hard on it with your thumb.

Dip in ampoule syringe needle so that its section is completely immersed in the liquid and begin to gradually draw up the medicine. As soon as you see that there is little left, tilt ampoule horizontally, turn the needle upside down and press it against the glass as much as possible. These actions will allow you to collect the drug with a minimum amount of air bubbles. Before you inject, do not forget to change the needle.

Many manufacturers of imported medicines produce ampoules that do not need to be filed. They can be distinguished by the presence of a special groove. To open such ampoule, it is enough to wrap its tip with a cloth and press harder on it. Just make sure that the break point is at the top and not at the bottom.

If the medicine is intended not for injections, but for internal use, then in no case do not pour or take the drug immediately from the ampoule, as small fragments may remain in it. Draw liquid through a syringe and carefully pour into a clean container. If necessary (if this does not contradict the instructions), the medicine can be diluted or washed down with water.

In ampoules, a liquid preparation for injection is sold, and in vials - a powder medicine. To dilute the powder in the bottle, buy a special solvent. Check with your doctor first which solvent is suitable for the prescribed drug. The contents of the ampoule, as a rule, do not need to be diluted.

Instruction

1. Carefully inspect the glass ampoule, read the name of the drug, the expiration date and the amount of the drug.

2. Shake the ampoule with medicine so that the liquid falls down and with a special nail file, which you will find in the box with ampoules, file the “neck” around the circumference. There are ampoules that do not need to be filed. If there is a mark in the form of a dot on the neck, then pushing away from you, open the ampoule.

3. With cotton wool moistened with alcohol, break off the sawn tip of the ampoule away from you.

4. Lower the needle into the ampoule and, pulling the plunger of the syringe, slowly draw up the medicine.

If you do not have an ampoule, but a vial (an open type of ampoule), then proceed as follows.

1. Bend off the cap on the bottle with a metal object.

2. Syringe the solvent for injection.

What are the health benefits of caffeine

Caffeine stimulates the central nervous system, increases mental and physical performance, reduces the feeling of fatigue and drowsiness, speeds up and intensifies heart contractions. In addition, it has a vasodilating effect, increases blood pressure, enhances urination and secretory activity of the digestive organs.

When is caffeine indicated?

Caffeine is indicated for use in diseases accompanied by depression of the functions of the central nervous system and the cardiovascular system, to increase physical and mental tone, and to combat bedwetting. The diseases of the first group include infectious diseases, migraine, drug poisoning, etc.

Caffeine is taken 2-3 times a day, 0.2 g each. The maximum single dose is 0.5 g, the daily dose is 1.5 g. If necessary, the drug is administered as an injection.

The use of caffeine-sodium benzoate may be accompanied by insomnia, palpitations, tremors, tinnitus, shortness of breath and vomiting. These side effects are rare.

Contraindications to the use of caffeine

Caffeine is contraindicated for use with increased excitability, severe hypertension or atherosclerosis, insomnia. It should not be used in severe cardiovascular diseases, glaucoma and in old age (over 70 years). During pregnancy and lactation, the drug can be used subject to the recommendations.

It should be borne in mind that with the systematic abuse of caffeine, drug dependence may develop.

Use of caffeine ampoules in the fight against cellulite

To combat cellulite, caffeine ampoules are used as part of masks and body wraps. Caffeine has a positive effect on the skin, moisturizing it, stimulating the breakdown of fatty deposits, shrinking pores, and improving local blood and lymph flow. The drug also helps to increase muscle tone, improve skin firmness and elasticity.

To get rid of cellulite, it is necessary to use caffeine ampoules in combination with other active ingredients - for example, menthol, comfort, rutin, seaweed. Such creams and gels improve blood circulation, tissue metabolism, stimulate the outflow of excess fluid and ultimately contribute to weight loss.

Wraps with caffeine

Caffeine-sodium benzoate ampoules can be used for body wraps. Applying cosmetics to the skin and wrapping it with cling film creates a greenhouse effect, due to which normal blood circulation in skin cells is restored, sweating improves, and harmful microelements are removed. Before wrapping, the skin must be cleaned, for which you can use a coffee grounds scrub.

Mix a teaspoon of any base cream with 4 ampoules of caffeine and Kapsikam ointment. Apply to problem areas, wrap with cling film. Keep the film on for 3 hours, do not eat or drink during this time. To increase the effectiveness of the procedure, you can do exercises or dance. The result will be noticeable after 10 procedures.

The procedure for opening the ampoule with the drug

To begin with, as required by the generally accepted rules for the use of any medicines, you need to read the name of the drug, determine the volume, and also make sure that the expiration date corresponds to the date of direct use of the medicine.
As a rule, along with the medicine and instructions for it, a special nail file for opening ampoules and vials is included in the kit. Before using the nail file, this ampoule must be shaken well so that all the medicine is at the bottom of the bottle.
Behind that nail file, “walk” around the circumference of the neck of the ampoule, gradually filing it.
With a cotton swab, which was previously moistened with alcohol, carefully wipe the ampoule and, pressing, break off the neck away from you. To protect yourself from cuts, it is recommended to use a napkin or cotton swab, after wrapping the neck of the ampoule before breaking off the top of the ampoule.
Lower the syringe with a needle into the opened ampoule, pulling the plunger, draw the required volume of solution.

It should be taken into account the nuance that during the collection of the medicine, the tip of the needle may wrap due to its contact with the walls of the vessel (and / or its bottom). For this reason, the needle may become blunt. Thus, it is considered correct to use one needle for a set of the drug, and the second is taken directly for the injection itself.

Also, observing the instillation of asepsis, it is recommended to use two needles. When performing manipulations with the needle, its sterility is violated, which can cause undesirable complications after the injection. Additional single needles can always be purchased from a pharmacy.

How to open an ampoule without a nail file?

First way

Now there are often ampoules and vials that can be opened without a special nail file. The manufacturer provides a structure that allows you to do without it. But, as a rule, such information is not indicated on the package, and the nail file is not provided in the package, so it will be necessary to check directly in practice.

Using a napkin or rag, press on the ampoule and break off the neck. If the attempt is unsuccessful, then the ampoule will still have to be filed.

Second way

Instead of a special nail file, you can use:

Manicure file. The result will be the same as from a special nail file. Hold the tool at an angle of 45 degrees to the neck and file. After that, the same actions - wrap the ampoule with a napkin and, pressing on the cut, break off the top of the ampoule.
A kitchen knife can also be used at home for this purpose. However, the effectiveness may be less than in the case of a nail file. In order to open the ampoule, it is necessary to make incisions in various directions and break off the neck, protecting yourself from cuts.

Ampoule with dry powder

In order to use the medicine in the form of a powder, which is intended for injection, it must first be dissolved. Various prescribed substances can be used as a solvent - special water, novocaine, lidocaine, etc.

Options for acceptable solvents should be indicated in the instructions for the drug itself, or the doctor must indicate it himself, depending on the specific case of using the drug.

To begin with, it is necessary to draw the required amount of the specified solvent into the syringe, remove the protective metal cap from the vial and wipe the rubber cap under it with a cotton swab that has been soaked in alcohol. After that, inject the contents of the syringe into the ampoule and shake the vial thoroughly.

Turning it upside down, again draw the already obtained ready-made injection into the syringe. Before the introduction of the solution to the patient, the needle must be replaced with a new one, since the needle, for obvious reasons, could become dull.

How to reduce air bubbles in the syringe

When taking the medicine, the needle section must always be completely immersed in the solution, otherwise air will enter the syringe along with the medicine, which will cause those very bubbles that are sometimes so hard to get rid of. This is the main reason for air to enter the syringe. Therefore, it is necessary to monitor the cut of the needle and immerse it completely in the drug.
When the liquid begins to run out in the ampoule, it will need to be placed horizontally, and the cut of the needle should be pressed against the wall of the vial as much as possible. After such actions, the needle becomes blunt and in order to reduce pain in the patient, it is advisable to change it to a new one. Separately packaged needles are sold at the pharmacy.
In a situation where the bubbles still got into the syringe, they are disposed of by whipping it. If the air still remains in the syringe and enters the body as a result of intramuscular injection, then this is not so scary, but it is advisable to avoid such cases. After the injection, air may be in the muscle or intercellular space, or in the vessel. For this reason, the capillary vessel may die, since it will be blocked by the very air that has entered it.

If the volume of air was greater, then in this case an “air infiltrate” will appear in the muscle, which is a seal, a lump. Symptoms and consequences are the same as with a normal infiltrate. It is also not dangerous, but rather unpleasant. Still, it is better to avoid getting air into the syringe with the medicine and inject according to the attached instructions for the drug.

By adhering to such simple at first glance rules, it is possible to carry out the entire injection procedure as painlessly and safely as possible - from opening the ampoule to directly introducing it to the patient.

1. Carefully inspect the ampoule, read the name of the medicine, its quantity and expiration date. 2. Shake the ampoule so that the medicine goes down, and file at the transition point from the narrow to the wide part (the nail file is in the medicine box). 3. With a special nail file for ampoules, file the “neck” of the ampoule well around the circumference. 4. With a cotton swab moistened with alcohol, wipe the ampoule and break off the tip away from you (better wrap the ampoule with a paper towel or cotton swab- so you protect yourself from accidental cuts). 5. Lower the needle with the syringe into the ampoule, pull the plunger towards you and draw up the medicine.

Please note that when taking medicine from an ampoule or vial, when the needle comes into contact with the walls of the vessel (and / or its bottom), the tip of the needle may "wrap", and thus the needle becomes blunt.
For this reason, in medicine it is considered correct to use two needles for injection: one - to collect the drug, the second - to directly inject.
The second reason for the need for two needles is the rules of asepsis. With many manipulations with the needle, especially when it comes into contact with the cap of the vial, etc., the sterility of the needle is violated and thus the likelihood of complications after the injection increases.

The ingress of air into the body with an intramuscular injection is not terrible, but not desirable.

With intramuscular injection, the air remaining in the syringe can enter either the muscle / intercellular space or the vessel (capillary). An air bubble trapped in a capillary can block it, and this vessel will die. In a more severe case (and large volume air), when air enters the muscle, a so-called "air infiltrate" (bump, seal) can form - with all the usual symptoms and consequences of infiltration. It's annoying, but not dangerous either.
In our opinion, it is still better to carry out injections according to the instructions, and "knock out" air bubbles from the syringe before introducing the drug into the body.

To make an injection or extract a cosmetic product, you must first open the ampoule. And difficulties may arise already at this stage. To avoid them, learn the important rules of such a seemingly simple manipulation.

How to open ampoules correctly?

How to quickly and correctly open an ampoule with medicine? If the drug is imported, then most likely you will have a container with a dot or a mark in your hands, and such a sign is applied in the thinnest section of the glass. That is, it is in this place that you need to make a break. First, it is better to wipe the ampoule with alcohol, then wrap it with a paper towel or disc, and only then break off the upper narrow part in one sharp movement. Then you can use the content.

If there is no mark on the ampoule, but the kit includes a special file designed for opening, then you need to use it. In one hand (preferably in the left, if the right one is working), take the container, and with the other hand, control the nail file. Start sawing the glass with confident movements. As soon as you see a clear notch formed during the sawing process, you can open the container. To do this, also use a napkin or cotton pad.

If you are using a serum or other cosmetic product, then there may not be any notches or nail files in the kit. But you can quite do without marks and additional devices, using improvised ones. So, it is most convenient to use a nail file, but it should be metal and thin. If one is not available, then take a penknife or a small kitchen knife, but proceed with extreme care so as not to cut yourself. And before manipulation, any of the items must be disinfected!

How to store the opened ampoule?

How much can be stored open ampoule? It all depends on its content. So, complex multicomponent drugs, as a rule, cannot be stored, so it is best to choose the appropriate volume and use it completely at one time, since it is unlikely that it will be possible to ensure tightness and sterility. And some substances are destroyed or change their properties and structure when interacting with oxygen. And if you use a non-sterile, expired or modified drug, you can not only negate its effectiveness, but also cause harm to health or even endanger life.

If you use a cosmetic product or use a drug for other purposes other than injection, such as ingestion, addition to cosmetics, or making masks for the face and body, then storage is allowed, but it has several rules.

First, close the container. To do this, the hole can be sealed with a plaster or tape, but you should not cover it with cotton wool, since the villi can get into the solution, which is undesirable.
Secondly, it is best to remove the ampoule in the refrigerator, and warm it to room temperature before use.
And thirdly, before storage, carefully read the instructions. In any case, do not use the drug after more than three days.

Tip: You can use a syringe for storage, as this container is airtight and sterile inside. Open the ampoule, draw its contents into a syringe and put it in the refrigerator. It is also better to stick a piece of paper with the date of opening the container so as not to exceed the expiration date.

Calculate your strength and do not squeeze the ampoule very hard so as not to accidentally crush it, otherwise the fragments will fall inside or cut your hands.
All manipulations are best done with rubber gloves that will protect you from cuts. And if you use disposable ones, they will ensure sterility and prevent the penetration of pathogenic microorganisms from your hands into the preparation.
Before opening the ampoule, shake it or gently tap the top several times with your finger so that the contents slide down.
The direction of the break is important. It is better to open the ampoule in the direction away from you, and not towards you.
It is best to open the ampoule, that is, to break off the upper part working hand, while the other should securely hold the container.
To avoid contamination due to accidental splashing of the product, as well as the spread of possible fragments, it is best to hold the ampoule over some kind of container, table or sink, depending on where you are performing the autopsy.
Before opening, carefully examine the ampoule from all sides to find out if there is a mark on its neck. The dot or strip may be small and inconspicuous, so it's best to be careful.
Hold the container securely so that its contents do not accidentally spill.

Now you can quickly open the ampoule in any conditions and save its contents.

How to open the ampoule correctly?

First of all, it is necessary to open the ampoule correctly. There are two types of ampoules according to the opening method:

traditional, which require a notch on the neck;
with a dot at the point where the glass cone was broken.

The ampoule opening sequence includes the following steps:

1) sawing is done with abrasive edges on one side of the neck;

2) without undue effort, it is carried out 3-4 times with a nail file along the selected side of the ampoule;

3) then it is necessary to moisten a cotton pad or ball in an antiseptic;

4) with one hand, the base of the cone with the medicine is held, and the thumb and forefinger of the second hand grasp the protrusion of the ampoule;

5) in order not to injure fingers, cotton wool is used;

6) a break is made by a sharp movement of the hand in the direction opposite to the one where there is a file.

This is the correct sequence for opening a medical ampoule. However, the nail file can be lost. Then a nail file from a cosmetic set or a piece of sandpaper will serve as a replacement for it. Be sure to wipe the place of the file with alcohol or another antiseptic to prevent the ingress of microorganisms into the preparation.

The ingress of air into the body with an intramuscular injection is not terrible, but not desirable.

With intramuscular injection, the air remaining in the syringe can enter either the muscle / intercellular space or the vessel (capillary). An air bubble trapped in a capillary can block it, and this vessel will die. In a more severe case (and with a large volume of air), when air enters the muscle, a so-called "air infiltrate" (bump, seal) can form - with all the usual symptoms and consequences of an infiltrate. It's annoying, but not dangerous either.
In our opinion, it is still better to carry out injections according to the instructions, and "knock out" air bubbles from the syringe before introducing the drug into the body.

How to open the ampoule correctly? How to open an ampoule?

Ampoules for injections have a specially applied marker: a colored dot on the top of the glass flask. It is not difficult to open such ampoules. It is only important to take the ampoule correctly in your hand: the marker should be facing you. Even without the use of protective equipment, the ampoule head easily breaks off with a sharp movement away from itself.

Some manufacturers still work on old equipment and pack drugs for injection in ancient-style ampoules that do not have a special marker and, so to speak, a neck on the body. Such an ampoule must be opened using a special cutting plate inserted into the package. With the help of this simple device, an inscription is made on the upper part of the ampoule and then everything is as in the first case: with a sharp movement away from you. The only caveat is that it is advisable to use a cotton pad or a piece of bandage here so as not to injure your hand during opening, because. if the file was made poorly, then glass fragments may form when breaking off.

That's all wisdom.

P.S. If the cutting plate is accidentally lost, then a simple abrasive stone, with which we usually sharpen kitchen knives, will help you open the ampoule.

The ampoule was with a point but stubborn, I made an injection from this ampoule, will the fragments get into the circulatory system and cause trouble?

I'll tell you how I do it personally by virtue of my profession. To do this, it is enough to have a small knife at hand - a nail file, which is usually put into a box with ampoule medicines. True, very often I see that this very nail file is not in the boxes, but I don’t understand why, because earlier in any box with medicinal ampoules there was always such a nail file either on a cardboard base or metal. Now neither one nor the other most often happens in them, and I began to save them so that I could use them again. I know for sure about this, since my mother is a medical worker.

And you need to open the ampoule, after preliminary sawing, after treating it with alcohol, and then it will easily break off. To do this, take a fleece and break the filed part, usually, it breaks off very easily for me, sometimes even without a fleece it breaks off easily.

Now releasing ampoules with a dot. Near the point there is already an inscription (or the glass in this place is much thinner than the glass of the ampoule itself), along which the ampoule nose will break. Therefore, the end of the ampoule is necessary break off sharply at the point.

If there is no dot on the ampoule, then the ampoule needs to be filed on one's own. For this, a special metal plate(scarifier). Instead of a plate, you can use knife, nail file, file, knife sharpener and even sandpaper.

When I opened an ampoule for the first time in my life, I managed to do it only in a barbaric way. The ampoule was ordinary, with a long thin nose. I couldn’t break it off in any way, then I just had to hit it with a knife, leaning the ampoule against the edge of the metal shell. True, the fragments still scattered outside the sink, but by some miracle, not a drop of medicine spilled!

Progress does not stand still. In the consumer society today, everything is aimed at making the product more convenient and easy to use. This also applies to the pharmaceutical industry. If a few years ago solid ampoules were produced, which had to be filed with a special nail file placed in the package, then over time everything changed. First, the nail files changed - they became more convenient and sharper, and today the ampoule does not need to be filed to open it. She's already drunk. on such ampoules there is a dot or a strip. To open it, just press on the top of the ampoule and that's it.

Look like this: if you bought a package of injection ampoules and there is a nail file in it, then you need to file the ampoules, and then take a cotton wool and break off the edge. If there is no nail file in the package with ampoules, then just take a cotton swab (so as not to injure yourself with a fragment) and break the top of the ampoule.

If there was no special nail file in the box with ampoules, then you can use a nail file, a small trihedral or diamond-shaped file. I have a lot of these and for my wife I gave one such miniature one with diamond chips for undivided use. Slightly file the neck of the ampoule and you can already take the cotton wool and break it off with a sharp movement. This is just in case, so as not to cut your fingers with broken glass.

I had to use a regular knife in the field. I just held the ampoule tightly and with a sharp blow of a hunting knife hit the neck of the ampoule from top to bottom. But the sharpness of the blow is definitely needed here.

Now there are no problems with this, almost all ampoules are marked with either a dot or a strip, you press it and there are no problems. And if a package without marking accidentally got in, then there must be a special plate inside.

I have the tip of the ampoule with (physical solution) crumbled.

Is it possible to draw a physio solution from such an ampoule?

What will be the consequences if you make an injection into the muscle of the physical. solution from such an ampoule?

Almost all modern ampoules come with a special rim (red or white), just press it lightly and the ampoule will open.

But, unfortunately, for some reason, the domestic pharmaceutical industry still produces old-style ampoules, and it is really difficult to open them. True, almost always a special nail file is placed in the box with ampoules - she needs to file the neck of the ampoule, cover it with a napkin and carefully break it off. If there is no nail file, or it is lost, one doctor advised me to do this: take a faience plate, turn it over and move the ampoule around the rim (on which it stands), the effect is the same as from the file.

First, it is recommended to knock on the top of the ampoule so that all the liquid passes through the neck of the ampoule. Then we place a napkin around the neck of the ampoule - it must be broken with a sharp movement away from you. The broken neck of the ampoule should be discarded immediately.

When buying, check that the package should contain a strip of metal with rough edges, a knife for ampoules. If not, ask from another package 🙂 Run the edge of the knife along the ampoule in the place where its nose is rounded and goes into the body, not necessarily with force - just to leave a mark. Then in one hand the case, in the other spout and break it off.

I opened it quickly and easily. To open the ampoule, I took a towel and carefully and slowly broke off the upper part towards me. Another option is that there are ampoules with an existing file, it will be even easier to open them in this way.

Just break off the excess part of the ampoule. Take a towel to avoid injury.